Zemic products suitable for SOLAS Regulation
Since the 1st of July 2016 the SOLAS ( Safety of Life at Sea) agreement has changed.
Due to this agreement containers need to be weighed before shipment.
In this post we will tell you which Zemic Products can be used for this new regulation.
Zemic customers that are working in the offshore industry and facing the SOLAS regulation are using the following Zemic Products in truck front loaders, crane scales and weighbridges:
|Go to SOLAS Weighing components|
This agreement was made a few years after the Titanic disaster in 1912. This agreement is made to ensure the lifes of people who work at sea. The agreement prescribed the amount of lifeboats, safety procedures and other emergency equipment.
To increase peoples' safety the containers need to be weighed before they will be allowed on board. In the past the official weight was not corresponding with the registered weight. This caused a lot of damage to ships, containers and most important people.
The weighing of the containers can be done by two different and approved methods. One method is to measure the total weight of the sea container in an empty and in a full condition. Another method to determine the weight of a seacontainer is to count the individual weight of the products inside of the container and add the weight of the packaging material.
For more information about the Zemic products in combination with the Solas regulation, do not hesitate to contact us.
With the amended agreement The International Maritime Organisation (IMO) wants that containers have a verified weight before they are loaded on a ship.